Solution Finish Black Trim Restorer: The Go-To for Faded Plastic!

Share This Article...

Like many of you, I’ve been frustrated by my vehicle’s black trim fading to that disheartening, chalky gray. It’s a battle against the sun and elements, and I’ve tried my fair share of products promising to bring back the shine. Most were temporary fixes, at best. Then, I kept hearing about Solution Finish Black Trim Restorer in the detailing circles, with its bold claims of long-lasting restoration. Naturally, I had to put it to the test myself.

In this deep dive into my Solution Finish review, I’ll share what made this product truly stand out to me, and why I consider it the best black trim restorer I’ve found for my car, truck, and SUV.

What Solution Finish Black Trim Restorer Is All About

When I first looked into Solution Finish, I learned it’s not just another dressing. This unique, oil-based, silicone-free restorer is designed to genuinely bring back the original black finish to sun-faded and oxidized exterior plastic and vinyl trim. What impressed me was its approach: instead of just sitting on the surface and washing away quickly, Solution Finish actually penetrates the plastic. It’s formulated to restore the pigments from within, which, in my experience, leads to a much more durable and factory-fresh appearance.

I’ve found it works beautifully on various black surfaces, including:

  • Bumper plastic trim
  • Mirror housings
  • Window moldings
  • Bed liners (although I have not tested this)
  • Running boards

Key Features and Benefits From My Perspective

From my own hands-on use, here’s why Solution Finish has become a firm favorite in my detailing arsenal:

  1. It Really Lasts (lasts even longer if you coat it after it has cured): This isn’t a temporary shine that disappears after a few washes. I’ve been genuinely impressed by its durability. I’ve seen it last for many months, and sometimes even over a year, depending on how much sun my car gets. It truly restores the color, making it feel like a permanent fix rather than just a cover-up. To take it even further I did a plastic ceramic coating after it was cured and that really made it last over 2 years.
  2. No Greasy Residue (assuming you wiped off the excess): After you apply it wipe off the excess and allow it to cure for about a day or two then it will not be greasy and leave a nice finish. However while it is curing it is sticky and will attract dust. Solution Finish is silicone-free, and I love that it leaves a clean, natural matte look. No streaking, no unwanted shine, just deep black.
  3. Surprisingly Easy to Apply: While I always emphasize the importance of good prep (which I’ll touch on later), the actual application is quite straightforward. I didn’t need any fancy tools, just some foam applicators and a little patience. It is linseed oil based so make sure you have the correct personal protective equipment on.
  4. That “New Car” Look: When I take the time to apply it correctly, the results are always professional. My trim looks genuinely new, which makes a huge difference in the overall appearance and value of my vehicle.

What Reddit Users Are Saying: Feedback from the Detailing Community

Beyond my own positive experiences, I’ve seen the car detailing community on Reddit frequently discuss Solution Finish, and their feedback largely aligns with mine, offering some great additional perspectives and tips. Here’s a summary of what I’ve seen common feedback:

The Positives:

  • “Magic in a bottle”: Many users are genuinely amazed by the product’s ability to transform severely faded, chalky gray plastics back to a deep, rich black, often describing the results as “like new.”
  • Easy Application: Despite requiring thorough preparation, the actual application process is generally considered simple and straightforward, with “a little going a long way.” Users often recommend foam or microfiber applicators.
  • True Dye, Not Just a Dressing: A frequently praised aspect is that Solution Finish acts as a dye, penetrating the plastic to restore pigment from within, leading to more authentic and lasting results compared to temporary dressings.
  • Good Longevity (with caveats): Many users report impressive durability, with the restoration lasting anywhere from several months to over a year. Longevity often increases significantly with proper preparation, a second coat, and especially when topped with a sealant or ceramic coating. Garage-kept vehicles tend to see the longest-lasting results.
  • Versatile Use: Beyond typical trim, users have successfully applied it to mud flaps, fender liners, and other engine bay plastics.

Points of Consideration:

  • Preparation is Paramount: Consistently, Reddit users emphasize that meticulous cleaning (degreasing to remove old dressings and grime) and masking off adjacent paint are critical. Skipping these steps can lead to poor adhesion, streaking, or staining.
  • Staining Risk: Because it’s a dye, Solution Finish can permanently stain unprotected paint, skin, or driveways if not wiped off immediately. Gloves are universally recommended.
  • Curing Time is Important: Some users experienced streaking or diminished longevity if the product got wet (e.g., from fog, rain or washing) before it had fully cured, typically within 6-24 hours. Allowing ample dry time is crucial.
  • Longevity Varies by Conditions: While durable, some daily drivers exposed to harsh sunlight and frequent washing without a protective topper might find the results start to fade after a few months, necessitating reapplication.
  • Competition with Cerakote: Cerakote Trim Restorer is frequently mentioned as a strong competitor. Some users prefer Cerakote for ease of use, while others stick with Solution Finish for its initial deep black finish and ease of achieving a uniform look, sometimes even topping Solution Finish with Cerakote for maximum longevity.

My Before & After: What I’ve Experienced

The difference after I’ve used Solution Finish has always been dramatic. I always see:

  • A deep, dark black color restored to my faded plastics.
  • A natural, non-greasy, matte finish. (after it dries)
  • And, when I remember to apply a sealant, extra protection against future fading.

While it’s highly effective, I’ve noticed that extremely porous or heavily textured trim might need a bit more effort or a second coat to get that perfect, even finish. Finishing it up with a plastic ceramic trim coating yields long lasting results.

My Takeaways: Pros and Cons of Solution Finish

After countless applications and seeing the results firsthand, here are my personal pros and cons:

Pros:

  • Good Durability: In my opinion, it’s one of the longest-lasting trim restorers out there, especially when I’ve prepped correctly and followed up with a protectant. To make it last even longer I follow up with a plastic trim ceramic coating.
  • True Color Restoration: It really dyes the plastic back to black, rather than just coating it. This makes a huge difference in the authenticity of the restoration.
  • No Greasy Feel: The silicone-free formula is a big win for me, as it means no dust attraction or slick surfaces. It is sticky for the first few days but once it fully dries it is better.
  • Can be a challenge to Work With: Once you get the hang of the prep, the application itself is quite simple. At first it is smelly and requires good gloves and application management so you dont get it everywhere.
  • Great Value: A small bottle really does go a long way, making it a cost-effective solution in the long run.
  • Revives Seriously Faded Trim: I’ve used it on some truly neglected plastics, and it’s always brought them back to life.

Cons:

  • Prep Work is Essential (Don’t Skip It!): This is probably the most crucial “con.” If I’m lazy with cleaning and masking, I risk less-than-perfect results or staining.
  • Staining Can Happen: I’ve learned the hard way that if it gets on paint or my skin, I need to wipe it off immediately. Gloves are non-negotiable for me now!
  • Not for Glossy Surfaces: It’s important to remember it’s for porous, textured, unpainted black plastic/vinyl. I wouldn’t use it on high-gloss or painted trim.
  • Sun Exposure Matters: While durable, I’ve noticed that my daily driver, which sits outside, might need a touch-up sooner than a garaged vehicle, especially if I haven’t sealed it afterward.

My Final Verdict: Is Solution Finish the Best Black Trim Restorer?

For long-term restoration of faded black plastic and vinyl, Solution Finish Black Trim Restorer is, in my book, one of the absolute best products out there. Its unique ability to deeply restore color with its dye, combined with its impressive durability, truly sets it apart. The overwhelming positive feedback I’ve seen and heard from the Reddit detailing community only reinforces my own strong recommendations.

While it does demand careful prep work and attention to curing, I can tell you from experience that the results are incredibly rewarding. If you’re looking to truly bring back that factory-fresh look to your vehicle’s exterior trim and make it last, Solution Finish is a highly recommended solution. It’s an investment that pays off immensely in both the visual appeal and the longevity of your car’s exterior. Please spend some extra money and time and finish it up by applying a ceramic coating after it has cured. It really makes the world of difference in longevity.

If your trim is not that faded or does not need to be restored yet than I probably would not use this product yet. It is a serious heavy-hitter product and will completely restore the plastic back to black. If you are not at the point where you feel the need to restore it then I would use something like Cerakote trim coat, Car Pro PERL or Turtle wax Graphene acrylic trim restorer.

Seriously, give your faded trim the transformation it deserves with Solution Finish – I think you’ll be as impressed as I am!

before and after photo of faded plastic and solution finish

Share This Article

Leave a Comment

Your email address will not be published. Required fields are marked *